Flexible Adhesives & Sealants

Eurobond Adhesives Stand: L11
  • Flexible Adhesives & Sealants
  • Flexible Adhesives & Sealants
  • Flexible Adhesives & Sealants
Flexible Adhesives & Sealants Flexible Adhesives & Sealants Flexible Adhesives & Sealants

A flexible approach to bonding.

MS Polymer flexible adhesives offer many benefits to the user and are ideally suited for many different applications including construction, modular and portable buildings manufacture, marine, caravan and motorhome manufacture and metal fabrication industries.

MS Polymer adhesives are flexible, one or two component moisture and/or chemically curing adhesives. Typically they will bond most materials together including metals, painted metals, wood, composites, glass and some plastics.

Depending on the chemistry of the particular adhesive they can have a very fast ‘’initial grab’’ and then ‘on cure’ or a steady through cure to a thickness of 3mm over a 24hr period depending on the environment in which they are applied.

Eurobond Adhesives offer a series of five different MS Polymers all with striking and distinctive properties.

SAFE FIX® FR300 Is a fire resistant flexible adhesive designed to bond most construction materials. SAFE FIX® has a fire resistance of up to 4 hours and can counter the spread of fire, smoke or toxic vapours. Safe Fix® FR 300 is also certified for horizontal joints and connections to floor/ceiling with walls, wooden and steel casings and all stud applications. The fire-resistance was tested and conforms with EN1366-4 to 240 minutes in a horizontal or vertical joint measuring 30 mm wide. The tests were performed in accordance with European standard EN1366-4:2000+A1:2000 using the standard heat curve. Based on the test performed in accordance with EN1366-4:2000+A1:2010 and the extended application in accordance with EN 15882- 4:2012, the system was classified in accordance with EN13501-2:2007+A1:2009.


Eurobond SOLO® – High Tack - Is a high tack, single part structural adhesive, with high initial grab and fast cure. It produces highly resilient bond between a wide range of substrates with the exception of PE and PP. The resultant bonds are resistant to water, sea water, oils and most common solvents and temperatures between -40°C  to +150°C as well as UV light and aggressive environments. Eurobond Solo-High Tack has been specifically formulated to build high initial bond strength on a variety of complex substrates including those associated with industrial prefabricated structures, portable utility buildings, dwellings, containers and vehicle bodies. It can be used for other industrial applications such as bonding and sealing of steel floor plates, rubbing strips, skylights, heavy profiles, lap seams etc. Eurobond Solo-High Tack has been designed to hold unsupported components against a vertical plane or soffit soon after application. Eurobond Solo-High Tack is non-hazardous, contains no free isocyanates, VOC’s, acids or halogens. For most applications primerless adhesion can be obtained. Eurobond Solo-High Tack is tolerant to damp substrates and does not shrink on curing.


Eurobond CLEAR FIX® - Is a ‘FOOD SAFE’ transparent, universal and flexible adhesive and construction joint seal that will bond all kinds of materials with the exception of low surface energy material such as PP and PE. This adhesive can be used on almost any surface and is extremely versatile. Eurobond CLEAR FIX® is completely free of solvents, plasticizers, silicones and isocyanates and is our most proven formulation.


Eurobond QUICK FIX®- Is a non-hazardous, high quality fast curing (1 hour) flexible 2-part MS Polymer adhesive supplied in a

convenient 290ml cartridge to fit most sealant applicator guns. It will bond most materials with the exception of low surface energy materials such as PP and PE. It is suitable for applications where a quick cure, high strength and permanently elastic bond is required or for applications where the bond design does not allow the normal penetration of atmospheric moisture to effect a cure. Quick Fix® exhibits good resistance to water, UV, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis.


Eurobond Multi Seal®- Is a grey coloured universal polymer adhesive and construction joint seal for bonding all kinds of materials with the exception of PE and PP. This adhesive can be used on almost any surface and is extremely versatile. It is completely free of solvents, plasticizers, silicones and isocyanates and is certified safe for use in applications with direct food contact.


If you would like help with your next project or would like to know more about the benefits of using our range of MS Polymer flexible adhesives then please contact our technical team.

Tel 01794 427888

Email sales@eurobond-adhesives.co.uk

Web. www.eurobond-adhesives.co.uk



Part of

M&E Week

Design Engineering Expo is part of Manufacturing and Engineering Week, a celebration of the best in UK manufacturing and engineering excellence and innovation.

A series of digital and live events taking place over 4 days from 6-9 June 2023 showcasing end-to-end manufacturing and engineering solutions, and encouraging conversation, business, knowledge sharing and action.

Read more


Premier Partner

Wurth logo

Knowledge Partner

Made Smarter

Audit, Tax & Advisory Sponsor

mha logo

Innovation Zone Sponsor

Arrow Logo


Media Partners

Workshop Sponsors

Manufacturing And Engineering Week